189303 - Gang-Rip Saw Blades HW "F"
Product
Drawing
-
-
- Tungsten Carbide [HW]
Technical data
Description
Machine / Application
- molders
- gang-rip saws with one or two shafts
- for precise ripping cuts in dry and planed soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
- type A and C with staggered double keyways
Advantages
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
- larger bore (max. Ø 100 mm) available for a surcharge
- for cutting height > 50 mm use version with HW rakers
- for inquiries / orders enclose specification sheet (see appendix)
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 350 [mm] | |
| B = Cutting width | 3,5 [mm] | |
| b = Body thickness | 2.5 [mm] | |
| Ø d = Bore diameter | 70 [mm] | |
| Ø dmax = Maximum bore diameter | 100 [mm] | |
| Z = No. of teeth | 28 | |
| DKN = Double keyway | 20x5 [mm] | |
| Hook angle = Hook angle | 20 [°] | |
| Tooth geometry = Tooth configuration | F | |
| LEUCODUR = Cutting material | HL Board 20 | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
