192764 - Sizing Saw Blades HW - LowNoise "WS"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- table saws
- vertical panel sizing saws
- for sizing cuts
Design
- vibration and noise damping ornaments
- additional expansion slots
- cutting material: HL Board 04 plus and HL Board 06
Advantages
- extremely low-noise and smooth running thanks to vibration and noise damping ornaments as well as special expansion slot combinations
- for each application case the correct tooth form
Notes
- Ident-No. 189690: extremely straight steel plate for Striebig panel sizing saws with scoring device
- NL**- Combi2 = 2/7/42 + 2/9/46 + 2/10/60
- NL**- Combi3 = 2/7/42 + 2/9/46 + 2/9,5/46,5 + 2/10/60
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 250 [mm] | |
| B = Cutting width | 3,2 [mm] | |
| b = Body thickness | 2.2 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Z = No. of teeth | 60 | |
| NL = Pin holes | 2/7/42 + 2/9/46 + 2/10/60 | |
| Hook angle = Hook angle | 10 [°] | |
| Corner∡ = Corner angle | 15 [°] | |
| Tooth geometry = Tooth configuration | WS | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
