Clipping Saw Blades HW for edge trimming "ES" - nn-System, without countersink
Article
Description
Machine / Application
- edge banders
- edge trimming machines
- for trimming of thin plastic-, veneer- and solid wood edges
Design
- special NoNoise gullet geometry
- positive or negative hook angle
- with and without shear angle
- tooth configuration: top bevel "ES (right + left)"
- cutting material: HW HL Board 06
Advantages
- especially low noise level
- noise reduction by approx. 6 dB(A) when idling
Notes
- sense of rotation see drawing
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Corner∡
[°] |
L/R |
Shear∡
[°] |
Tooth geometry | Cutting quality* | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||||||
100 | 3,2 | 2.2 | 32 | 20 | -6 | 30 | L | 5 | ES | HL Board 06 | Homag | 192507 | ||||
100 | 3,2 | 2.2 | 32 | 20 | -6 | 30 | R | 5 | ES | HL Board 06 | Homag | 192508 | ||||
100 | 3,0 | 2.2 | 32 | 20 | 8 | 30 | L | 5 | ES | HL Board 06 | Wilmsmeyer | 192505 | ||||
100 | 3,0 | 2.2 | 32 | 20 | 8 | 30 | R | 5 | ES | HL Board 06 | Wilmsmeyer | 192506 | ||||
100 | 2,4 | 1.6 | 22 | 30 | -8 | 10 | L | 5 | ES | HL Board 06 | EBM Hebrock | 80489950 | ||||
100 | 2,4 | 1.6 | 22 | 30 | -8 | 10 | R | 5 | ES | HL Board 06 | EBM Hebrock | 80489949 | ||||
100 | 2,6 | 2 | 32 | 30 | -10 | 15 | L | 0 | ES | ▲▲ | HL Board 06 | Brandt | 192510 | |||
100 | 2,6 | 2 | 32 | 30 | -10 | 15 | R | 0 | ES | ▲▲ | HL Board 06 | Brandt | 192509 | |||
100 | 2,6 | 2 | 32 | 30 | 10 | 15 | L | 0 | ES | HL Board 06 | Homag CN | 192514 | ||||
100 | 2,6 | 2 | 32 | 30 | 10 | 15 | R | 0 | ES | ▲▲ | HL Board 06 | Homag CN | 192513 | |||
100 | 2,6 | 1.6 | 32 | 30 | 10 | 10 | L | 0 | ES | ▲▲ | HL Board 06 | Brandt | 192511 | |||
100 | 2,6 | 1.6 | 32 | 30 | 10 | 10 | R | 0 | ES | ▲▲ | HL Board 06 | Brandt | 192512 | |||
125 | 2,6 | 1.6 | 32 | 30 | 10 | 10 | L | 0 | ES | HL Board 06 | Homag EDGETEQ S-380 | 193307 | ||||
125 | 2,6 | 1.6 | 32 | 30 | 10 | 10 | R | 0 | ES | HL Board 06 | Homag EDGETEQ S-380 | 193308 | ||||
150 | 3,5 | 2.2 | 22 | 30 | -6 | 15 | L | 5 | ES | HL Board 06 | IMA | 192521 | ||||
150 | 3,5 | 2.2 | 22 | 30 | -6 | 15 | R | 5 | ES | HL Board 06 | IMA | 192522 | ||||
150 | 3,5 | 2.2 | 30 | 30 | 12 | 15 | L | 5 | ES | HL Board 06 | SCM-IDM | 192519 | ||||
150 | 3,5 | 2.2 | 30 | 30 | 12 | 15 | R | 5 | ES | HL Board 06 | SCM-IDM | 192520 | ||||
150 | 3,5 | 2.2 | 30 | 44 | 4/5,5/52 | -12 | 45 | L | 10 | ES | ▲▲▲ | HL Board 06 | Homag Powerline | 192524 | ||
150 | 3,5 | 2.2 | 30 | 44 | 4/5,5/52 | -12 | 45 | R | 10 | ES | ▲▲▲ | HL Board 06 | Homag Powerline | 192523 | ||
160 | 3,6 | 2.5 | 40 | 18 | 8 | 30 | L | 0 | ES | HL Board 06 | HOLZ-HER | 192525 | ||||
160 | 3,6 | 2.5 | 40 | 18 | 8 | 30 | R | 0 | ES | HL Board 06 | HOLZ-HER | 192526 | ||||
170 | 3,5 | 2.2 | 30 | 48 | 4/5,5/52 | -12 | 45 | L | 10 | ES | HL Board 06 | Homag Powerline | 192528 | |||
170 | 3,5 | 2.2 | 30 | 48 | 4/5,5/52 | -12 | 45 | R | 10 | ES | HL Board 06 | Homag Powerline | 192527 |