Sizing Saw Blades DP "HR" - nn-System DP flex

sizing saws and table saws
Vertical panel sizing saws
clipping saws
for precise cutting in all common wood-based panels such as raw and laminated particle and MDF boards, plywood boards, HDF, WPC, cement and gypsum fiber boards, mineral composites, Alucobond, ...
for ripping and cross cuts in solid wood, glued laminated timber, thermotreated wood

hardly perceivable noise level
highest productivity and economic efficiency thanks to extremely long edge lives due to DP-tipping
reduced cutting pressure thanks to hollow back tooth geometry

it is not recommended to use the saw blades for longitudinal cuts in soft wood and material thicknesses of more than 40 mm
chip-free cuts can only be guaranteed in combination with a suitable scoring saw blade
Attention! for these saw blades the thickness of the splitting wedge must range between 2.0 and 2.4 mm
included in delivery: splitting wedge must be ordered separately

	Ø D [mm]	B [mm]	b [mm]	Ø d [mm]	Ø d [inch]	Z	NL	Hook angle [°]	Tooth geometry	Cutting quality*	Ident-No.	Comp./ Inqu.
Dimensions entered are not listed? Please contact our application consulting . available from stock available on short notice Delivery time on request
	250	2,5	2	30		50	2/7/42 + 2/9/46 + 2/10/60 + 8/5,2/90	10	HR	▲▲▲	192440	\|
	254	2,5	2	15,875	5/8	50		10	HR	▲▲▲	192441	\|
	260	2,5	2	30		60	2/7/42 + 2/9/46 + 2/10/60	10	HR	▲▲▲	192442	\|
	280	2,5	2	30		60	2/7/42 + 2/9/46 + 2/10/60	10	HR	▲▲▲	192443	\|
	303	2,5	2	30		60	2/7/42 + 2/9/46 + 2/10/60 + 8/5,2/90	10	HR	▲▲▲	192444	\|
	303	2,5	2	30		95	2/10/60 + 2/9/46 + 2/9/46,5 + 2/7/42	10	HR		193238	\|
	315	2,5	2	30		64	2/7/42 + 2/9/46 + 2/10/60	10	HR	▲▲▲	192445	\|
	350	2,5	2	30		72	2/7/42 + 2/9/46 + 2/10/60 + 8/5,2/90	10	HR	▲▲▲	192446	\|