192789 - Sizing Saw Blades HW "G5"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- table saws
- chop and miter saws
- for chip-free sizing cuts as well as clipping and mitre cuts in wood-based panels, solid woods and plastics
Design
- tooth configuration: G5
- cutting material: HW HL Board 04 plus
Advantages
- excellent cutting quality for cross cuts
- excellent cutting quality thanks to special tooth geometry
- extremely long edge lives
- noise-reduction thanks to laser ornaments
Notes
- pay attention to nmax!!!
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 200 [mm] | |
| B = Cutting width | 3,0 [mm] | |
| b = Body thickness | 2.2 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Z = No. of teeth | 65 | |
| Hook angle = Hook angle | 15 [°] | |
| Shear∡ = Shear angle | 15 [°] | |
| Tooth geometry = Tooth configuration | G5 | |
| nmax = maximum RPM | 7,630 [min-1] | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
