Sizing Saw Blades HW "G5"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Article
Description
Machine / Application
- table saws
- chop and miter saws
- for chip-free sizing cuts as well as clipping and mitre cuts in wood-based panels, solid woods and plastics
Design
- tooth configuration: G5
- cutting material: HW HL Board 04 plus
Advantages
- excellent cutting quality for cross cuts
- excellent cutting quality thanks to special tooth geometry
- extremely long edge lives
- noise-reduction thanks to laser ornaments
Notes
- pay attention to nmax!!!
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Shear∡
[°] |
Tooth geometry |
nmax
[min-1] |
Cutting quality* | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||||||
| 200 | 3,0 | 2.2 | 30 | 65 | 15 | 15 | G5 | 7,630 | HL Board 04 plus | 192789 | |||||
| 220 | 3,0 | 2.2 | 30 | 70 | 15 | 15 | G5 | 6,940 | HL Board 04 plus | 192790 | |||||
| 240 | 3,0 | 2.2 | 30 | 75 | 15 | 15 | G5 | 6,360 | ▲▲▲▲ | HL Board 04 plus | 192791 | ||||
| 250 | 3,0 | 2.2 | 30 | 80 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 6,110 | HL Board 04 plus | 192792 | ||||
| 280 | 3,0 | 2.2 | 30 | 85 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 5,450 | HL Board 04 plus | 192793 | ||||
| 300 | 3,0 | 2.2 | 30 | 100 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 5,090 | HL Board 04 plus | 192794 | ||||
| 303 | 3,2 | 2.2 | 30 | 100 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 5,040 | HL Board 04 plus | Striebig | 192795 | |||
| 315 | 3,0 | 2.2 | 30 | 100 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 4,850 | HL Board 04 plus | 192801 | ||||
| 350 | 3,0 | 2.2 | 30 | 100 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 4,400 | HL Board 04 plus | 192796 | ||||
| 380 | 3,0 | 2.2 | 32 | 120 | 15 | 15 | G5 | 3,340 | HL Board 04 plus | elumatec | 192802 | ||||
| 400 | 3,0 | 2.2 | 30 | 120 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 3,340 | HL Board 04 plus | 192797 | ||||
| 450 | 3,6 | 2.8 | 30 | 130 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 3,180 | HL Board 04 plus | 192798 | ||||
| 500 | 3,6 | 2.8 | 30 | 145 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 + 2/10/70 | 15 | 15 | G5 | 2,670 | HL Board 04 plus | 192799 | ||||
| 550 | 4,0 | 3.2 | 30 | 160 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | 15 | 15 | G5 | 2,780 | HL Board 04 plus | 192803 | ||||