p-System Profile Cutters HW
Product
Drawing
-
- Tungsten Carbide [HW]
- MEC
Article
Description
Machine / Application
- machine
- EWD FR15, FR16
- Linck VPF340
- for milling of corners / profiling
Design
- one part and segmented
- turnover knives can be used on all four sides
- extremely scoring cut
- cutting material: HW HL Solid 20
Advantages
- no chippings due to knots
- considerable improvement of surface quality compared to the existing chipping knives
- small chips suitable for pellet production
- extremely long edge lives (up to 8 million running meters)
Notes
- chips are not suitable for paper industry
- feed rate per tooth fz = 2-8 mm
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Shear∡
[°] |
L/R | Machine/Type | Remarks | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||
| 360 | 139,5 | 164 | 110 | 8+8 | 70 | R | EWD | vertical axis top | PSE1 | ||
| 360 | 139,5 | 164 | 110 | 8+8 | 70 | L | EWD | vertical axis bottom | PSE2 | ||
| 402 | 139 | 164 | 110 | 8+8 | 70 | R | EWD | vertical axis top | PSE11 | ||
| 402 | 139 | 164 | 110 | 8+8 | 70 | L | EWD | vertical axis bottom | PSE12 | ||
| 402 | 121 | 139 | 120/200 | 8+8 | 70 | R | Linck | vertical axis top | PSE13 | ||
| 402 | 121 | 139 | 120/200 | 8+8 | 70 | L | Linck | vertical axis bottom | PSE14 | ||
| 360 | 64 | 164 | 60 | 4+4 | 70 | R | EWD | horizontal axis right | PSE3 | ||
| 360 | 64 | 164 | 60 | 4+4 | 70 | L | EWD | horizontal axis left | PSE4 | ||
| 360 | 64 | 164 | 60 | 5+5 | 70 | R | EWD | horizontal axis right | PSE5 | ||
| 360 | 64 | 164 | 60 | 5+5 | 70 | L | EWD | horizontal axis left | PSE6 | ||
| 360 | 64 | 164 | 60 | 8+8 | 70 | R | EWD | horizontal axis right | PSE7 | ||
| 360 | 64 | 164 | 60 | 8+8 | 70 | L | EWD | horizontal axis left | PSE8 | ||
| 360 | 89,2 | 164 | 60 | 6+6 | 70 | R | EWD | horizontal axis right | PSE9 | ||
| 360 | 89,2 | 164 | 60 | 6+6 | 70 | L | EWD | horizontal axis left | PSE10 | ||