192938 - Panel Sizing Saw Blades HW - U-Cut "TR-F"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- panel sizing saws
- for sizing cuts in plastic-laminated panels
Design
- up to ØD=360, 10 degree hook angle
- from ØD=380, 15 degree hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 04 plus
Advantages
- improved cutting quality thanks to optimized cutting geometry
- noise-reduction thanks to laser ornaments
Notes
- specifically for plastic-laminated panels and plywood in single sheets and stacks
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
- NL**- Combi5 = 2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 480 [mm] | |
| B = Cutting width | 4,8 [mm] | |
| b = Body thickness | 3.5 [mm] | |
| Ø d = Bore diameter | 60 [mm] | |
| Z = No. of teeth | 72 | |
| NL = Pin holes | 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 | |
| Hook angle = Hook angle | 15 [°] | |
| Tooth geometry = Tooth configuration | TR-F | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
| Machine/Type | Homag (Holzma) 530 | |
|
Dimensions entered are not listed?
available from stock |
||
suitable scoring saw blade
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Scoring Saw Blades HW - adjustable "WS" | Ø340x4,4-5,6xØ45 Z=2x24 | 193262 | ||
|
Scoring Saw Blades HW "WS" | Ø340x5,0xØ45 Z=108 | 188501 | ||
|
NF-Chop Saw Blades HW - profiles "G7" | Ø250x3,2xØ30 Z=84 NL/DKN= 2/7/42 + 2/9/46 + 2/9,5/46,5 + 2/10/60 | 192965 | ||
|
Scoring Saw Blades HW "KO-F" - nn-System | Ø200x4,85-5,65xØ45 Z=36 | 192705 | ||
|
Scoring Saw Blades HW "KO-WS" | Ø200x4,85-5,65xØ45 Z=36 | 192745 | ||
|
available from stock |
|||||
