Grooving Saw Blades HW - MAN
Product
Drawing
-
- Tungsten Carbide [HW]
- MAN
Article
Description
Machine / Application
- table shapers
- for chip-free grooving in solid woods and in wood-based panels
Design
Advantages
Notes
- Application against feed along the grain (solid wood)
- Application with feed only with mechanical feed (wood-based materials)
- other groove widths possible by set combinations, maximum total groove width 10 mm for MAN
- Groove width calculation for tool sets: sum of all "b" + HW overlap left and right + spacer thickness
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Hook angle
[°] |
nmin-nmax
[min-1] |
Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||
| 125 | 1,5 | 0.8 | 30 | 12 | 15 | 6100-10500 | 188359 | ||
| 125 | 1,8 | 1 | 30 | 12 | 15 | 6100-10500 | 188360 | ||
| 125 | 2,0 | 1.2 | 30 | 12 | 15 | 6100-10500 | 188361 | ||
| 125 | 2,2 | 1.2 | 30 | 12 | 15 | 6100-10500 | 188362 | ||
| 125 | 2,5 | 1.4 | 30 | 12 | 15 | 6100-10500 | 188363 | ||
| 125 | 3,0 | 2 | 30 | 12 | 15 | 6100-10500 | 188364 | ||
| 125 | 3,5 | 2.5 | 30 | 12 | 15 | 6100-10500 | 188365 | ||
| 125 | 4,0 | 2.5 | 30 | 12 | 15 | 6100-10500 | 188366 | ||
| 125 | 4,5 | 3 | 30 | 12 | 15 | 6100-10500 | 188367 | ||
| 125 | 5,0 | 4 | 30 | 12 | 15 | 6100-10500 | 188368 | ||
| 125 | 6,0 | 4 | 30 | 12 | 15 | 6100-10500 | 188369 | ||
| 125 | 7,0 | 5 | 30 | 12 | 15 | 6100-10500 | 188370 | ||
| 125 | 8,0 | 5 | 30 | 12 | 15 | 6100-10500 | 188371 | ||
| 125 | 10 | 6 | 30 | 12 | 15 | 6100-10500 | 188372 | ||
| 150 | 1,5 | 0.8 | 30 | 12 | 15 | 5200-8800 | 188373 | ||
| 150 | 2,0 | 1.2 | 30 | 12 | 15 | 5200-8800 | 188375 | ||
| 150 | 2,2 | 1.2 | 30 | 12 | 15 | 5200-8800 | 188376 | ||
| 150 | 2,5 | 1.5 | 30 | 12 | 15 | 5200-8800 | 188377 | ||
| 150 | 3,0 | 2 | 30 | 12 | 15 | 5200-8800 | 188378 | ||
| 150 | 3,5 | 2.5 | 30 | 12 | 15 | 5200-8800 | 188379 | ||
| 150 | 4,0 | 3 | 30 | 12 | 15 | 5200-8800 | 188380 | ||
| 150 | 4,5 | 3.5 | 30 | 12 | 15 | 5200-8800 | 188381 | ||
| 150 | 5,0 | 4 | 30 | 12 | 15 | 5200-8800 | 188382 | ||
| 150 | 6,0 | 4 | 30 | 12 | 15 | 5200-8800 | 188383 | ||
| 150 | 7,0 | 5 | 30 | 12 | 15 | 5200-8800 | 188384 | ||
| 150 | 8,0 | 5 | 30 | 12 | 15 | 5200-8800 | 188385 | ||
| 150 | 9,0 | 6 | 30 | 12 | 15 | 5200-8800 | 188386 | ||
| 150 | 10 | 6 | 30 | 12 | 15 | 5200-8800 | 188387 | ||