Gang-Rip Saw Blades HW "WS"
Product
Drawing
-
-
- Tungsten Carbide [HW]
Article
Description
Machine / Application
- molders
- gang-rip saws with one or two shafts
- for precise ripping cuts in dry and planed solid woods and wood-based materials
Design
- staggered double keyways of type A and C
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 06 for wood-based materials
- cutting material: HW HL Board 20 for solid woods
Advantages
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
- larger bore (max. Ø 100 in) available for a surcharge
- for inquiries / orders enclose specification sheet (see appendix)
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
DKN
[mm] |
NL |
Hook angle
[°] |
Corner∡
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
||||||||||||||
| 190 | 3,4 | 2.2 | 30 | 20 | 20 | 10 | WS | HL Board 20 | 188049 | |||||
| 200 | 3,2 | 2.2 | 60 | 34 | 20 | 10 | WS | HL Board 06 | Paul | 188038 | ||||
| 200 | 3,2 | 2.2 | 60 | 42 | 20 | 10 | WS | HL Board 06 | Paul | 188041 | ||||
| 210 | 3,2 | 2.2 | 100 | 34 | 12,5x4 | 20 | 10 | WS | HL Board 06 | 189283 | ||||
| 220 | 3,4 | 2.2 | 50 | 24 | 20 | 10 | WS | HL Board 20 | 188051 | |||||
| 300 | 3,2 | 2.2 | 80 | 28 | 18,5x5 | 6/5,5/91 + 4/6,6/95 + 2/13/100 | 20 | 10 | WS | HL Board 20 | 188054 | |||
| 300 | 3,2 | 2.2 | 70 | 36 | 20x5 | 20 | 10 | WS | HL Board 20 | 189285 | ||||
| 300 | 3,2 | 2.2 | 80 | 36 | 18,5x5 | 6/5,5/91 + 4/6,6/95 + 2/13/100 | 20 | 10 | WS | HL Board 20 | 189286 | |||
| 300 | 3,2 | 2.2 | 70 | 48 | 20x5 | 20 | 10 | WS | HL Board 20 | 189287 | ||||