Aktualności
DIACURVE: Novel nesting cutter
Perfect cut, easy to handle
The cutters are stocked with D12 and Z2 (for panel thicknesses 12-15 mm),
Z3 (16-19 mm and 22-25 mm), Z4 (16-19 mm) and D 3/8 inch with Z3 (16-19 mm)
Innovative shape and sustainable wrapping:
the DIACURVE nesting cutter from LEUCO
has an end-to-end, arc-shaped cutting edge
and packaging made of recycled material.
Efficient and clean: the DIACURVE
nesting cutter from LEUCO with its
large gullets offers cuts without chip
congestion.
The unusual DIACURVE nesting cutter from LEUCO catches the eye immediately. With end-to-end arc-shaped cutting edges and large gullets, the tool delivers high cutting quality without chip congestion. In addition, its diameter is always constant, which makes it uncomplicated and safe to handle.
If woodworking took place on a stage, the DIACURVE nesting cutter from LEUCO would be the star there. Its overall appearance and the design of the diamond tablets underline the innovative and patent-pending construction at first glance.
The unique cutter is taking the nesting scene by storm
Everything about it is extraordinary: instead of many small individual cutting edges, the DIACURVE cutter relies on end-to-end cutting edges in the shape of an arc. With fewer diamond tablets and two alternating shear angles per cutting edge, the tool achieves precise and chip-free results without overcuts – which protects the surfaces of the wood materials. The extra-large gullets enable higher feed speeds and at the same time prevent chips from jamming.
Chip breaker grooves additionally reduce the cutting pressure, and their soft design prevents overcuts. Further, its PTFE coating allows the chips to slide off the tool better and lends it a striking appearance to boot. The unique design also allows for a reinforced cutter core, made of low-cost steel instead of the expensive heavy metal commonly used in nesting cutters.
The tool even offers space for more cutting edges
The new nesting cutter is offered in five variants, each designed for panel thicknesses from 12 to 25 millimeters. The filigree tool can also accommodate several cutting edges: four cutting edges are possible with a cutter diameter of 12 millimeters, three cutting edges at 9.5 millimeters.
The choice between two, three or four teeth determines the cutting speed and feed. Depending on the material and speed, feed rates of up to 29 m/min can be achieved with the tool in a four-tooth configuration.
The DIACURVE nesting cutter is suitable for nesting all common wood materials. The tool is designed for one edge life without resharpening. Its constant diameter simplifies use: no changes to the tool database are necessary, which rules out incorrect entries by operating personnel and thus increases process reliability – an advantage for regions without a comprehensive service network or where skilled labor is lacking.
LEUCO is available to its customers at any time and worldwide for questions regarding the use of all tools offered. In this way, the company brings together customer orientation and innovation. And also thinks ecologically: the packaging of the DIACURVE nesting cutter is already made of recycled plastic.
Komunikaty w skrócie
-
31 maj 2024
Narzędzia trzpieniowe , Rozwiązania
Milling advanced materials with thin diameters -
28 mar 2024
Narzędzia trzpieniowe , Nowości ze świata narzędzi
New nesting cutter Z4+4 based on Fibonacci: Slim, swift and stable -
17 lis 2023
Narzędzia trzpieniowe , Rozwiązania
t3-System cutter with 3D-Holz Design - Perfect milling in wood -
8 maj 2023
Narzędzia nasadzane , Narzędzia trzpieniowe , Rozwiązania
Solutions 8.5 mm grooves in rear panel:
Grooving cutter and shank-type cutter -
6 gru 2021
Narzędzia trzpieniowe , Clamping Systems , Rozwiązania
Nesting of solid core panels: Application data and tips -
29 wrz 2021
Narzędzia nasadzane , Narzędzia trzpieniowe , Piły tarczowe , Clamping Systems , Płytki obracane / wymienne, noże , Rozdrabniacze , Wiadomości ze świata LEUCO
LEUCO review, LIGNA.Innovation Network 2021 -
22 wrz 2021
Narzędzia trzpieniowe , Nowości ze świata narzędzi
LEUCO t3-System cutters with triangular turnover knife inserts -
10 mar 2021
Narzędzia trzpieniowe , Nowości ze świata narzędzi
Nowe frezy do kieszeni pod zamek VHW do wysokich wymagań -
18 lut 2021
Wiertła , Narzędzia trzpieniowe , Rozwiązania
Łącznik LAMELLO® Cabineo wiercenie lub frezowanie – trzy alternatywy dla narzędzia