192664 - Panel Sizing Saw Blades HW - U-Cut speed "TR-F"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- horizontal panel sizing saws
- for stack cuts in raw and plastic-laminated panels
Design
- vibration and noise damping ornaments
- additional expansion slots
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 04 plus
Advantages
- for highest performance demands
- reduced cutting pressure and power consumption thanks to optimized cutting geometry
- extremely low-noise and smooth running thanks to vibration and noise damping ornaments as well as special expansion slot combinations
- clearly increased edge life thanks to improved HW grade
Notes
- stack height: Ident-No. 192629 up to max. 190 mm / Ident-No. 192631 up to max. 210 mm / Ident-No. 192633 up to max. 215 mm
- recommended projection: 20-30 mm
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 575 [mm] | |
| B = Cutting width | 5,8 [mm] | |
| b = Body thickness | 4 [mm] | |
| Ø d = Bore diameter | 60 [mm] | |
| Z = No. of teeth | 60 | |
| NL = Pin holes | 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 | |
| Hook angle = Hook angle | 20 [°] | |
| Tooth geometry = Tooth configuration | TR-F | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
| Machine/Type | Homag (Holzma) | |
|
Dimensions entered are not listed?
available from stock |
||
suitable scoring saw blade
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Scoring Saw Blades HW "KO-WS" | Ø200x5,9-6,6xØ45 Z=36 | 192748 | ||
|
available from stock |
|||||