193159 - Panel Sizing Saw Blades HW - Q-Cut "G6"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- panel sizing saws
- for finish cuts in veneered, foiled or melamine-laminated panels, in single sheets or in stacks
Design
- vibration and noise damping ornaments
- additional expansion slots
- up to ØD=370, 10 degree hook angle
- from ØD=380, 15 degree hook angle
- tooth configuration: G6
- cutting material: HW HL Board 04 plus
Advantages
- for highest performance demands
- impressive cutting quality thanks to exact and precise cuts
- reduced cutting pressure and optimized cutting geometry G6
- extremely low-noise and smooth running thanks to reinforced body and vibration and noise damping ornaments
- clearly increased edge life thanks to improved HW grade
Notes
- projection: min 20 - 25 mm
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
- NL**- Combi5 = 2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 380 [mm] | |
| B = Cutting width | 4,8 [mm] | |
| b = Body thickness | 3.6 [mm] | |
| Ø d = Bore diameter | 60 [mm] | |
| Z = No. of teeth | 72 | |
| NL = Pin holes | 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 | |
| Hook angle = Hook angle | 15 [°] | |
| Tooth geometry = Tooth configuration | G6 | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
| Machine/Type | Homag (Holzma) | |
|
Dimensions entered are not listed?
available from stock |
||
suitable scoring saw blade
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Scoring Saw Blades HW "KO-F" - nn-System | Ø180x4,85-5,65xØ45 Z=36 | 192702 | ||
|
Scoring Saw Blades HW "KO-HR" - nn-System | Ø180x4,85-5,65xØ45 Z=36 NL/DKN= 2/9/110 | 192690 | ||
|
Scoring Saw Blades HW "KO-WS" | Ø180x4,85-5,65xØ45 Z=36 | 192736 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø280x4,85-5,65xØ45 Z=72 | 192750 | ||
|
available from stock |
|||||
